RL24 RL28 RL34
  • RL Home Page
  • RL 24
  • RL 28
  • RL 34
  • Status 580
  • "The Venture"
  • News and Events
  • Register of Owners
  • Discussion Forum
  • Buy and Sell
  • Surveys

  • The RL Story
  • Picture Gallery
  • Cruising in an RL
  • Bay to Bay Race
  • Links to Other Sites
  • Tips & Modifications
  • Personal Thoughts
  • RL24 Nationals
  • RL24 State Titles
  • RL24 Owners Assoc.
  • RL24 Hall of Fame
  • RL24 Asn Newsletters
  • RL24 Asn AGM Minutes
  • North American RL24's
    		•
    WWW.RLYACHTS.NET
    RL24, RL28, and RL34 Trailable Yachts
    from Rob Legg Yachts

    RL Yacht Owner's Discussion Forum
    Your Name:
    Email Address:
    Password: ( Needed to edit or delete this message.)
    Message Title:
    Text of Message:
    Add an Image:
    		An image can also be attached to this listing. Click "Browse" to select the image file on your PC. It can be a JPEG or a GIF file. The file will be uploaded to the server, scaled to fit, and will appear beside the entry.

    Replying to:Positive Bouyancy
    From Marine and Safety Tasmania Positive Buoyancy The MAST Recreational Boating Safety Review, conducted in 2000, indicated that nearly 50% of all boating incidents involved vessels capsizing or being swamped. This obviously results in the occupants ending up in the water where there is a risk of hypothermia. In July 2006, the NMSC’s Australian Builders Plate (ABP) was introduced requiring manufacturers of new vessels to provide buoyancy in all their vessels under 6 metres. This ABP is also required to indicate whether the boat would have basic flotation or whether it would float level, known as positive buoyancy. But those people who are boating in older boats (those that were constructed prior to July 2006) do not necessarily know whether their boat will stay afloat in such an incident. The attached report highlights the reasons why buoyancy is so important, how to calculate the required buoyancy in a vessel and also provides detailed information on the types of buoyancy that can be used and how it can be easily fitted to existing boats. If you are unsure of retro fitting your own boat you should seek the services of a suitably qualified boat builder. I have tried and failed to attach this excellent article/report on how to both calculate and ensure your boat has sufficient foam buoyancy onboard. Keep in mind that 6 metres is approximately 20 foot and they are referring to a power boat with a heavy engine down aft. Enter: www.mast.tas.gov.au then click on: Recreational Boating then: General Safety then: Positive Buoyancy in Trailer Boats